Home > Clock Interrupt > Bsod Clock Interrupt Not Received Secondary

Bsod Clock Interrupt Not Received Secondary


I for ONE do not have any CD discs, i never buy them because i dont use CD's. Do you think that has something to do with this BSOD? Until I got this message in one of the screens. permalinkembedsaveparentgive gold[–]bfjkasds 0 points1 point2 points 3 years ago(0 children)Was your stock cooler working when you put your computer together? useful reference

Full Review be quiet! Pay special attention to any chipset/board drivers and Graphics drivers as well. Get the answer Alucard679Jul 11, 2012, 10:39 AM Might be a faulty chip.. Please be as specific as possible. http://www.tomshardware.com/forum/47489-63-bsod-clock-interrupt-received-secondary-processor

A Clock Interrupt Was Not Received On A Secondary Processor Solved

If it's giving you error messages, try the following from an elevated command prompt: cd \ cd Windows\System32\Drivers ren intelppm.sys intelppm.bak This is to do with Intel power management and it's If you need better performance, buy a good graphic card. Taking a look at your dump file, the issue resolves around ntoskrnl.exe - which is the Windows OS Kernel. Any help would be appriciated.

It's just a fact of life overclocking. No soliciting of any kind. This rarely happens and it usually restores itself rather quickly giving me an error message at the bottom of the screen. Clock Interrupt Definition I'm not all too sure what is the cause of my troubles, but I know that I had major stability issues with the sound card I was using a long way

These devices have problems: Not Available USB\VID_0CF3&PID_3000\5&21E855A5&0&1 The drivers for this device are not installed. 802.11n Wireless LAN Card PCI\VEN_1814&DEV_3062&SUBSYS_30621814&REV_00\4&1D98F028&0&00F0 This device is disabled. What Is A Clock Interrupt jcgriff2 BSOD Posting Instructions - Windows 10, 8.1, 8, 7 & Vista ` ` `Carrona Driver Reference Table (DRT) https://www.sysnative.com/ Sysnative Hex-Decimal-UNIX Date Conversion Has Sysnative Forums helped you? Back to top #11 Anshad Edavana Anshad Edavana BC Advisor 2,805 posts OFFLINE Gender:Male Location:India Local time:06:32 AM Posted 21 July 2013 - 02:29 AM Hi Resolving Bugcheck 101should https://www.sysnative.com/forums/bsod-crashes-kernel-debugging/4592-bsod-clock-interrupt-not-receieved-secondary-processor.html Try contacting Intel support about it and give them the error code.

Ive done loads of research and it seems that this problem can be just about anything! A Clock Interrupt Was Not Received On A Secondary Processor 0x00000101 So you have two problems: your cpu reset because of a power fluctuation, and your power supply did not prevent the system from booting until the power was stable.I would fix Grrrr gamerk316Apr 3, 2015, 7:49 PM Silly suggestion: Try a different USB port/hub, and make sure nothing else is plugged in. permalinkembedsaveparentgive gold[–]auto98 0 points1 point2 points 3 years ago(4 children)Limits listed by manufacturer usually refer to stability limits rather than damage limits.

What Is A Clock Interrupt

My current settings on MSI Afterburner when overclocking are: 1.124v/1024mhz core clock/2118 memory clock, i have two H60 cooled MSI 560ti Twin Frozr II's using dwood brackets, aftermarket copper heatsinks on http://www.overclock.net/t/1355630/bsod-clock-interrupt-was-not-received-on-a-secondary-processor-within-the-allocated-time-interval Thanks in advance. A Clock Interrupt Was Not Received On A Secondary Processor Solved for giving me the... A Clock Interrupt Was Not Received On A Secondary Processor Overclock If you continue to receive any more BSOD, upload the new dumps ( i hope you won't ).

That was roughly two years ago and I was not having an blue screens then. see here Sorry we were not particularly clear initially, but hopefully all is OK now :) Richard Reply With Quote 12-06-2012,03:22 PM #5 fuller10e View Profile View Forum Posts View Blog Entries View If you accept cookies from this site, you will only be shown this dialog once!You can press escape or click on the X to close this box. A_Used_UsernameApr 4, 2015, 8:23 PM Wow The BSOD Doesn't happen in Safe mode But Safe mode only runs the basic files and drivers necessary to run Windows but some how it A Clock Interrupt Was Not Received On A Secondary Processor Vmware

Skill Sniper 8GBHard DriveOptical DrivePowerCaseSamsung 840 120GBASUS DVD WriterXFX TS550 PSU NZXT Phantom 820View all hide details Reply Third Build (32 items) Guest Computer (8 items) Components degrade slowly over time, this is accelerated by overclocking. PinheddJul 11, 2012, 5:05 PM This is caused by a faulty chip that's tied to an interrupt line. this page Turns out there were some independent settings from BiOS on my AMD control center that were overclocking my CPU, it seems fine now, temps below 50c while playing!!!

Reply With Quote « Random BSODS on freshly installed Win7 x64 SP1 | BSOD windows 10 while gaming at random intervals » Similar Threads BSOD Clock interrupt was not receieved on Stop: 0x00000101 Dual-core optimizer is not necessary at all. Also remove the CPU and reinsert it to fix any possible contact issues between CPU and CPU socket.

Thanks for your help!

Does the increased voltage have any effect on CPU degradation even if its technically colder than what its supposed to be run at? Extracting the contents of the iso gives me nothing but an empty folder. Quote: NOW, about the dual core optimizer. Clock Watchdog Timeout Occasionally this BSOD is a bad motherboard and even more rarely (at least in my experience) a corrupted windows install.

Error: (07/12/2013 01:37:07 AM) (Source: Microsoft-Windows-Kernel-Processor-Power) (User: NT AUTHORITY) Description: Performance power management features on processor 1 in group 0 are disabled due to a firmware problem. Only problems was selected while No driver and all were not. What's frustrating with this one is the solution seems to be different on each system. http://easywebvideosoftware.com/clock-interrupt/blue-screen-of-death-a-clock-interrupt-was-not-received-on-a-secondary-processor.php Restart and test, but then start to go through all your drivers and check with the manufacturers for updates.

Last edited by Versteken: 10-20-2011 at 01:24 PM. My temps are 60C max on load, (peak at 60C), they idle at 35C sometimes as low as 28C on good days. ThanksRobbie 18 answers Last reply Oct 13, 2015 Best Answer Apr 4, 2015 More about bsod clock interrupt received secondary processor allocated time interval TheGuyFromWiganApr 1, 2015, 2:07 PM Please can Back off your CPU overclock if it's OC'd.

Edited by Anshad Edavana, 12 July 2013 - 05:37 AM. I had no idea.